Wayne Zhang

Following below step to clear/reset the device configuration, which will load the default configuration.   to erase config db and routing configure, can use these command: 1) sudo rm /etc/sonic/con...

It can use command line “show platform summary”, “show platform syseeprom” to find the serial number. or find it from device label in packing box. show platform summary Plain Textroot@sonic:/h...

 SONiC installation through ONIEThere are two options to install SONiC via ONIE, one option is from USB file, one option is from url. Option 1: Installing SONiC image from USB file1) Prepare a USB ...

GT - 1GX - 10GV - 25GC - 100GDC - 200GQC - 400G

  No, Eth0 can only used as mgmt port, can't used as service port for traffic forwarding.   The MGMT interface is separated from the forwarding plane inside the device, and is not involved in funct...

For Enhance SONiC software, here is the guideline to change the admin password. 1) sudo config username add name -ek,  input the new password 2) sudo config save, save the configuration change. The...

ZTP (Zero Touch Provisioning) is a function that running on switch, which can auto load configuration from ZTP server when the switch boot for the first time. ZTP is active by default, and you can’...

Warranty Scope: These standard warranty terms (“Warranties”) exclusively defines Micas’ obligations (and hence the customer’s rights) in case of defects of Micas Networks products (“Products”). Dif...

To enhance the usability of the device, its numerous commands are categorized based on their functions, streamlining their application. The Command Line Interface (CLI) encompasses various command ...

You can view the switch model, software version, hardware version, switch serial number and other information by the display version command. Micas> privilegeMicas# display version